Latest test panel Tenders | Government test panel Tenders

Central Government/Public Sector

CTN :44924129

03 Jul, 2026 NA

Koraput - Odisha

Tender For bid to ras supply of auto test panel (atp) for al31fp engine loom test

Central Government/Public Sector

CTN :45724164

27 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of epoxy based elastified top coat (2 components) shade ral-7012 for painting of underframe and interior of coaches, as per drawing/specification: mdts-094 revision 1 with amendment slip no.1 of nov'2008. test panel for accelerated test be prepared by applying two coats of this paint. safety clause as per cpm/rcf letter no. rcf/hsq/plg/ppmf/16122 dated 21/3/2025. installation & commissioning: inclusive. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45722699

04 Jul, 2026 NA

Mumbai - Maharashtra

Tender For single screen digital pressure gauge for test panel having- protection -ip40, input supply -24 volt dc, pressure range 0-15kg/cm2, input pressure port size -1/8 or 3/8. make- smc/wika/techno/ckd or similar. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45715086

06 Jul, 2026 NA

Multi City - Multi State

Tender For supply, installation, commissioning & demonstration of digital ultrasonic cleaner of capacity 5.3 liters max. for cleaning nickel-chrome test panel and other equipment parts after testing. detailed specification as per annexure- a. [ warranty period: 60 months after the date of delivery ] ]

State Government

CTN :45411968

29 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For corrigendum : construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm th

Central Government/Public Sector

CTN :45561310

07 Jul, 2026 NA

Perambalur - Tamil Nadu

Tender For corrigendum : kit for dye penetrant flaw detection in self spray aerosol cans conforming to is: 3658-1999 (reaffirmed-2020) & is: 12889/2018 (ra-2024), rev 1 of dec. 2018, consisting of (i)cleaner :non-aqueous, non-halogenated (ii)dye penetrant:visible dye (red colour), solvent removable (iii)developer:non-aqueous wet type note:- 1.ratio by volume for cleaner, dye penetrant and developer shall be 3:1:22.one kit = cleaner - 3 containers, dye penetrant - 1 container, & developer - 2 containers of 500ml capacity each with net content of 400ml. 3.product should be non-toxic, non-corrosive & chemically non-active to all metals 4.should contain low halide & sulphate contents. 5.should detect surface flaws upto 1 micron width x 30 micron depth on standard ni-cr test panel 6.products shall have shelf life of 2 years from the date of manufacture 7.firm should give extra guarantee coverage for the products manufactured more than two months prior to date of actual supply 8.rate shall be quoted per `kit` only. offers with rates for units other than `kit` will summarily be rejected is: 3658-1999 (reaffirmed-2020) & is: 12889/2018 (ra- 2024), rev 1 of dec. 2018 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45024624

20 Jun, 2026 NA

Kolkata - West Bengal

Tender For bid to ras supply of switch and fuse test panels for yard 3037 to 3040 ngopv : : - switch and fuse test panel 415v,230v,24v , lamp and fuse testing panel , accessories and installation material , obs-fuse link-control ckt , obs-fuse link- powerckt , obs-indicating lamp , obs-dp on-off switch,230v , obs-tp on-off switch,415v , obs-dp mcb,24v dc , documentation of hard copy , documentation of soft copy

State Government

CTN :45586913

17 Jul, 2026 3.72 Crore

Ambala - Haryana

Tender For tender for supply of shifting of transmission lin - earth work in excavation of foundations of bridges culverts , buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around a for ordinary gravel soil involving pick work l_r ref no 6.7a of pb csr2020 , cement concrete 1_4_8 with stone aggregate 40mm gauge ii mixing by mechanical means using concrete mixer volumetric typet_r ref no. 10.11 b ii of pb csr 2020 , fixing , leveling , centering , alignment and setting of stubs complete in all respect satisfaction of engineer in charge (lumsum) n/s item , cold twisted deformed ribbed_tor steel bar bars fe 500 grade as per is _1786_2008 for rcc works , where not included in the complete rate of rcc including bending and placing in position in complete t_r ref no. 18.18 of pb csr2020 , shuttering for faces of concrete foundations and foundation beam and plinth beam (vertical or battering) ref no. 9.1 of pb csr2020 , centering and shuttering for columns (square or rectangular or polygonal in plain) ref no. 9.4 of pb csr2020 , reinforced cement concrete m_20 mechanically batch mixed using batch type concrete mixer as by is_1791 and vibrated by needle vibrate but excluding steel reinforcement centring and shuttering in foundation and plinth. ref no. 10.15 of pb csr2020 , extra for pumping charges of batch mix concrete _ready mix conrete work rmc ref pb csr 2020 item no. 10.46 , extra for using admixture in designed mix concrete ref pb csr 2020 item no. 10.50 , extra for carriage of rmc_batch mixed concrete with transit mixture beyond 1st km ref pb csr 2020 item no. 10.47 , design , testing , fabrication , supply , erection , foundation of 220 kv monpole pd 30 degree_60 degree bxa_32m , m60_3000lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc complete in all respect , cpri vetting charges of monopoles , supply of stubs of 220kv m/c tower type nmd krr design (weight 1901.28kg ht and 720kg ms including gi nuts and bolts weight 39.36 kg ) , supply of tower body of 220kv m/c tower type nmd+0 mtr. extn. krr design (weight 16094.64 kg ht and 8678.83 kg ms ncluding gi nuts and bolts weight 1111.15 kg) , supply of tower body including extension of 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 17774.9 kg ht and 9697.23 kg ms ncluding gi nuts and bolts weight 1250.18 kg) , supply of stub template suitaible for 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 1230.92 kg ms ncluding gi nuts and bolts weight 49.16 kg) , earthing arrangement of towers complete in all respect , danger plate , number plate , phase plate set of 3 , anti climbing device (acd) with concertrina wire , acsr conductor zebra 0.4 sq inch (copper eq.) , 220kv 160kn polymer string insulator , double tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , straight joint for acsr zebra 0.4 sq. inch (copper eq.) , vibration damper for acsr zebra 0.4 sq. inch (copper eq.) , bird guard , ladder/step bolts with washers. , form box , span marker_globules day marking sphere , 24 fibre(dwsm) opgw fibre optic cable , opgw tension fitting complete , opgw vibration damper , opgw joint box , opgw down lead clamp , erection of towers , stringing and sagging of conductors , earth wire/opgw wire and accessories , including tack welding of bolts complete in all respect , dismantlement of 02 towers including all necessary items and conductor including transportation of dismantled material from site to bbmb store panipat.

State Government

CTN :45587085

17 Jul, 2026 5.08 Crore

Ambala - Haryana

Tender For tender for supply of raising height of transmission line -earth work in excavation of foundations of bridges culverts , buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around a for ordinary gravel soil involving pick work l_r ref no 6.7 a of pb csr2020 , cement concrete 1_4_8 with stone aggregate 40mm gauge ii mixing by mechanical means using concrete mixer volumetric type t_r ref no. 10.11 b ii of pb csr 2020 , fixing , leveling , centering , alignment and setting of stubs complete in all respect satisfaction of engineer in charge lumsum n_s item , cold twisted deformed ribbed_tor steel bar bars fe 500 grade as per is _1786_2008 for rcc works , where not included in the complete rate of rcc including bending and placing in position in complete t_r ref no. 18.18 of pb csr2020 , shuttering for faces of concrete foundations and foundation beam and plinth beam (vertical or battering) ref no. 9.1 of pb csr2020 , centering and shuttering for columns square or rectangular or polygonal in plain ref no. 9.4 of pb csr2020 , reinforced cement concrete m-20 mechanically batch mixed using batch type concrete mixer as by is_1791 and vibrated by needle vibrate but excluding steel reinforcement centring and shuttering in foundation and plinth. ref no. 10.15 of pb csr2020 , extra for pumping charges of batch mix concrete _ready mix conrete work rmc ref pb csr 2020 item no. 10.46 , extra for using admixture in designed mix concrete ref pb csr 2020 item no. 10.50 , extra for carriage of rmc_batch mixed concrete with transit mixture beyond 1st km ref pb csr 2020 item no. 10.47 , design , testing , fabrication , supply , erection , foundation of 220 kv monpole pd 30degree-60degree bx__36m , m60-3000lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc complete in all respect , design , testing , fabrication , supply , erection including foundation of 220 kv monpole pd 30degree_60degree bxa_24m , m56_2500lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc.complete in all respect. , cpri vetting charges of monopoles , supply of stubs of 220kv m_c tower type nmd krr design weight 1901.28kg ht and 720kg ms including gi nuts and bolts weight 39.36 kg , supply of tower body including extension of 220kv m_c tower type nmd plus 6 mtr. extn. krr design weight 18905.99 kg ht and 11081.5 kg ms ncluding gi nuts and bolts weight 1316.41 kg , supply of stub template suitaible for 220kv m/c tower type nmd plus 6 mtr. extn. krr design weight 1230.92 kg ms ncluding gi nuts and bolts weight 49.16 kg , earthing arrangement of towers complete in all respect , danger plate , number plate , phase plate set of 3 , circuit plate set of 2 , anti climbing device acd with concertrina wire , acsr conductor zebra 0.4 sq inch copper eq. , earth wire 7_3.15mm , 220kv 160kn polymer string insulator , double tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , single tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , straight joint for acsr zebra 0.4 sq. inch (copper eq.) , single tension hardware fitting suitaible for earth wire size 7_3.15mm , straight joint for earth wire size 7_3.15mm , vibration damper for acsr zebra 0.4 sq. inch (copper eq.) , vibration damper for earth wire size 7_3.15mm , bird guard set of 3 , ladder/step bolts with washers. , form box , span marker_globules day marking sphere , erection of towers , stringing and sagging of conductors , earth wire and accessories , including tack welding of bolts (about 750 bolts) complete in all respect , dismantlement of 02 towers including all necessary items and conductor including transportation of dismantled material from site to bbmb store panipat.

Central Government/Public Sector

CTN :45554878

02 Jul, 2026 NA

Hubli - Karnataka

Tender For supply,installation,testing and commissioning of test panel for temperature sensors checkingof ac 3 phase locos. the specifications as per attached annexure. make: digiqual or equivalent. [ warranty period: 30 months after the date of delivery ] ]

Test Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors